Skip to content
GrSpy
Electronics, programming and stuff
  • Posts
  • About
  • Contact
  • Github

Category: Uncategorized

Cloning the remote control of an RC-switch using TI CC1101

December 30, 2019 grspy 7 Comments

The CC1101 wireless RF transceiver from TI is a low-cost (~$4) wireless module that you can connect to your MCU…

Continue Reading →

Filed under: CC1101, SDR

Programming Core51822 (BLE400) with Bus Pirate (or Raspberry Pi) and OpenOCD

May 1, 2019 grspy 6 Comments

BLE400 is a motherboard (development/evaluation kit) for the Core51822 (nRF51822) Bluetooth LE module (SoC). It costs around $13, with the…

Continue Reading →

Filed under: ARM, BLE400, Bluetooth, Bus Pirate, OpenOCD, Raspberry Pi, uVision

Customizing ZTE H108NS

March 30, 2019 grspy 7 Comments

A few days ago, I bought a new printer, since my last one out of the blue just stopped printing,…

Continue Reading →

Filed under: Bus Pirate, H108NS, MIPS

Program AT89S52 with Arduino

March 1, 2019 grspy 3 Comments

We are going to use an Arduino Uno as an ISP to program the AT89S52 microcontroller. AT89 series from Atmel…

Continue Reading →

Filed under: 8051, Arduino, AT89S52, AVRdude, uVision

Bus Pirate as a logic analyzer

January 25, 2019 grspy Leave a comment

Many months now I wanted to test the logic analyzer feature of the bus pirate, which is documented here. In…

Continue Reading →

Filed under: Bus Pirate, Logic Analyzer

Identifying the frequency of an old RF remote

December 22, 2018 grspy Leave a comment

For some reason, I have kept around a remote control of a garage door we had 20 years ago, made…

Continue Reading →

Filed under: SDR

Programming the ATtiny85 with bus pirate

September 14, 2018 grspy Leave a comment

The ATtiny85 is a very small size, high-performance 8-bit microcontroller which you can get for about $2 in ebay (DIP-8…

Continue Reading →

Filed under: Arduino, ATtiny, AVRdude, Bus Pirate

Recent Posts

  • Cloning the remote control of an RC-switch using TI CC1101
  • Programming Core51822 (BLE400) with Bus Pirate (or Raspberry Pi) and OpenOCD
  • Customizing ZTE H108NS
  • Program AT89S52 with Arduino
  • Bus Pirate as a logic analyzer

Recent Comments

  • Mike on Cloning the remote control of an RC-switch using TI CC1101
  • sigint on Program AT89S52 with Arduino
  • Otto Klaasen on Cloning the remote control of an RC-switch using TI CC1101
  • Otto Klaasen on Cloning the remote control of an RC-switch using TI CC1101
  • Stefanos on Customizing ZTE H108NS

Archives

  • December 2019
  • May 2019
  • March 2019
  • January 2019
  • December 2018
  • September 2018
Privacy Policy
Copyright © 2025 GrSpy